(SOFTWARE) DUMPS - EMV SDK + DDA Function R+W

(SOFTWARE) DUMPS - EMV SDK + DDA Function R+W - Latest Version! Buy EMV Software Reader/Writer

The advantage:

• All required software
• 2x recommended Dumps shop
• With a private method to cash out
• EMV Binlist included
• Instructions (below)
• Full F.A.Q. (below)

Instructions:

► Start your Laptop/Computer

► Once is done run EMV as admin in the same folder with the rest of the files,You will see an box asking you for your License key Enter your license key and allow to the software 1/2 Min for the complete installation.

► Connect your hardware to your laptop From the software Interface Select your hardware and press connect it is connected then the software will show you a popup with the connected Hardware.

► From the software interface select your card format and press Check USB Port a popup will show you the connected com port.

► Select your type of card Visa,MasterCard Etc…

► Press the Button Generate ARQC Key (this will generate a unique ARQC Key)

► Press Generate Master Key (This will Generate a Master Key)

► Check the Box Generate a New ICVV For Each Transaction,Accept EPI MCI Credit Debit,Accept ARPC Key,Store ARPC Key,USE EMV Tag and ICVV.

► Press the button Check ARQC Key and Check Master Key.

► Select The Card Expiration Data (The day is not Important Only the Month and Year)

► Enter The Pin code if you have it (If you are in USA and you want to use the card in POS then the PIN Is not Necessary but if you will like to use the Card in ATM then You need the Pin code)

► Enter Track 1 and Track 2 ATTENTION THE TRACK 2 NEED TO BE WITH D not = Example 1234567891085696D1465446886489484 Not 1234567891085696=1465446886489484, because the software will burn the data over your EMV Chip in .hex format since the POS/ATM is communicating in .hex not txt.

► Now press Valid data a popup will show up with the data you write in the software interface please check if is correct if it is then pressed Burn-card Button and allow the software 30/1 Min in order for it to burn the data over the EMV Chip.

► Press the button EXIT to exit the software, IMPORTANT DON’T PULL OUT THE CARD WHEN THE SOFTWARE IS OPEN EXIT THE SOFTWARE THEN YOU PULL OUT THE CARD.

► Read the card a gain and see if all is ok for this simply run the software as admin, enter your card in the Hardware, and from the software interface press, the button Read Card allow it 15/30 sec and the data will show up if all is ok.

Now you are ready to use the card in any POS/ATM.

Frequently asked questions:

Well,most of the commercial EMV Software like RB,X2 matrix etc.. They are all use the same code in fact only the software interface is changing, and ALL OF THEM don’t use any EMV Digital signature, but we do.

• What is if lose my Laptop/Computer, will you send me new software with a new license?

No, if you lose your Laptop/Computer then you will need to buy new software.

• I need to travel with the software but I don’t what to get my laptop with me what I can do?

You will need to create a Virtual Machine and install the EMV SDK on that Virtual Machine then you need to place the virtual machine on a 120 GB USB Stick you can simply travel with your USB and when you what to use the software you need to connect the USB to a Laptop/Computer and you will be able to run the EMV SDK.

• How do I install a virtual machine? You will need a windows 7/8/10 .iso file,and you will need to install Virtual Box on your PC, Install Virtual Box (https://www.youtube.com/watch?v=7WdjSBZ794Q) install windows 7 in the virtual box (https://www.youtube.com/watch?v=HjDJNLNOa58)

Note: Software may become outdated, this is why I created a full bundle for a decent price. No refunds!! Also, this package does not come with any support on how to setup (for assistance buy the Ultimate package - Diamond)

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! SCROLL BELOW FOR THE ANSWER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Impossible they say?! Not if hofnar05 steps in! As many know he can make the impossible possible.. He has proven himself again and has found THE ultimate SAUCE for this.. He does not give away too much from his personal sauce, but here is a small chat we had:

@hofnar05 says the following:

So I have found out that it is indeed POSSIBLE to write the EMV chip IF you have the correct and up-to-date software + correct INT files.

Now different experts all said it is NOT theoretically possible to cash out 201 track and bypass the EMV chip, since there are way too many handshakes that need to be made. To keep my explanation easy, when cashing out your CC you need to perform to many actions which also need to be correct and happen at the same time (in real-time) on multiple security levels.

So I agree with all the arguments..

But since I am AGAINST things that are made impossible.. I needed to create a possible way.. Software only ain't going to cut the deal!

This is where I can tell you that I used the following:

• 75% Social Engineering Skills
• 15% Software to write the EMV chip
• 10% Luck

And for the people who don't know what Social Engineering = Social Engineering is a manipulation technique that exploits human and in this case machine error to gain private information, access, or valuables. In fraud, these "human hacking" scams tend to lure unsuspecting users into exposing data, spreading malware infections, or giving access to restricted systems.

This method is for sale, but on purpose not listed on the website, this I do since there will be to much demand and then they might patch the method. (This I don't want for my loyal clients, since the software and method are expensive) Small note: Updates for the software are not supported for this package, also support is only available for customers who purchased the Ultimate package (diamond).

It also comes with 2 shops to buy dumps track 201 (track 101 you can get out of 201)